Insulation grade F, protective grade IP55, suitable for the badworking conditions.No gearbox design, motor and main rotor through
the coupling directly connected, high transmission efficiency.Wide range of speed regulation, high precision, wide range of air flow
regulation.
1.Intelligent Control System
Direct display of discharge temperature and pressure, operating frequency,current,power,operating state.Real time monitoring of
discharge temperature and pressure, current, frequency fluctuations.
2.The Latest Generation High Efficiency Permanent Motor
Insulation grade F, protective grade IP55, suitable for the badworking conditions.No gearbox design, motor and main rotor through
the coupling directly connected, high transmission efficiency.Wide range of speed regulation, high precision, wide range of air flow
regulation.The efficiency of the permanent magnet motor is higher 3%-5% than regular motor, efficiency is constant, when the speed
drops, still remain the high efficiency.
3.The Latest Generation Super Stable Inverter
Constant pressure air supply, air supply pressure is accurately controlled within 0.01Mpa.Constant temperature air supply, general
constant temperature set at 85ºC make the best oil lubrication effect and avoid high temperature to stop.No empty load,reduce energy
consumption by 45%, eliminate excess pressure.For each 0.1mpa increase of air compressor pressure, energy consumption increases
by 7%.
4.Wide Working Frequency Range To Save Energy
Frequency conversion ranges from 5% to 100%.When the user s gas fluctuation is large, the more obvious energy saving effect and
the lower the low-frequency running noise, applicable to any place.
5.Small Start-up Impact
Use frequency conversion permanent magnet motor, start smooth and soft.When the motor starts, the current does not exceed the rated
current, which does not affect the power grid and the mechanical wear of the main engine, greatly reduces the power failure and prolongs
the service life of the main screw machine.
6.Low Noise
The inverter is a soft start device, the start-up impact very small, noise will be very low when start-up.At the same time, PM VSD
compressor running frequency is less than the fixed speed compressor during stable operation, mechanical noise decreases very much.
| PM VSD Screw Air Compressor Specification 7.5kw-45kw | |||||||||
| Molde | SLT-7.5V | SLT-11V | SLT-15V | SLT-18.5V | SLT-22V | SLT-30V | SLT-37V | SLT-45V | |
| Motor | Power(kw) | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 3 | 45 |
| Horespower(ps) | 10 | 15 | 20 | 25 | 30 | 40 | 50 | 60 | |
| Air displacement/Working pressure(M³/Min./MPa) | 1.2/0.7 | 1.6/0.7 | 2.5/0.7 | 3.2/0.7 | 3.8/0.7 | 5.3/0.7 | 6.8/0.7 | 7.4/0.7 | |
| 1.1/0.8 | 1.5/0.8 | 2.3/0.8 | 3.0/0.8 | 3.6/0.8 | 5.0/0.8 | 6.2/0.8 | 7.0/0.8 | ||
| 0.9/1.0 | 1.3/1.0 | 2.1/1.0 | 2.7/1.0 | 3.2/1.0 | 4.5/1.0 | 5.6/1.0 | 6.2/1.0 | ||
| 0.8/1.2 | 1.1/1.2 | 1.9/1.2 | 2.4/1.2 | 2.7/1.2 | 4.0/1.2 | 5.0/1.2 | 5.6/1.2 | ||
| Air outlet diameter | DN20 | DN20 | DN20 | DN20 | DN20 | DN20 | DN20 | DN20 | |
| Lubricating oil volume(L) | 10 | 16 | 16 | 18 | 18 | 30 | 30 | 30 | |
| Noise level dB(A) | 60±2 | 62±2 | 62±2 | 64±2 | 64±2 | 66±2 | 66±2 | 66±2 | |
| Driven method | Direct driven | Direct driven | Direct driven | Direct driven | Direct driven | Direct driven | Direct driven | Direct driven | |
| Start method | PM VSD | PM VSD | PM VSD | PM VSD | PM VSD | PM VSD | PM VSD | PM VSD | |
| Weight(kg) | 250 | 400 | 400 | 550 | 550 | 700 | 750 | 800 | |
| External dimensions | Length (mm) | 950 | 1150 | 1150 | 1350 | 1350 | 1500 | 1500 | 1500 |
| Width (mm) | 670 | 820 | 820 | 920 | 920 | 1020 | 1020 | 1020 | |
| Height (mm) | 1030 | 1030 | 1030 | 1230 | 1230 | 1310 | 1310 | 1310 | |
Q1: Are you factory or trade company?
A1:Yes,we are factory.Thank you.
Q2 : What's your factory's production capacity?
A2: About 1000 units per day.Thank you.
Q3: Warranty terms of your machine?
A3: One year for whole machine, two years for air end, technical support for life.Thank you.
Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.Thank you.
Q5:Where is your factory located?
A5:Our factory is located in Shandong Linyi city which nears Qingdao port about 4 hours.Thank you.
Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.Thank you.
Q7: How much can you save if you buy our screw air compressor?
A7: Production of compressed air energy consumption may be more thaconsumption, can significantly reduce energy consumption, VS conon actual gas consumption, reduce the additional 44% to 25% of the energy saving program.
Due to the different freight rates in each country, you are welcome to contact us for specific freight charges.
Support
and suppliers
Auto-start diesel generator set is to add an automatic control system to the basic diesel generator set. It has the function of automatic starting. Suneco Auto-start diesel generator sets are the best supplier and manufacturer of Auto-start diesel generator set. Contact us now for the price of Auto-start diesel generator set.
